<\/p>\n
Acoustic analyses help identify noise sources that exceed acceptable levels and determine the required level of noise reduction. All analyses and tests are performed by specialists with a PhD in vibroacoustics and acoustics. Tests are conducted according to certification standards such as BREEAM, LEED, EU Taxonomy, and DGNB.<\/p>\n
Having issues with noise<\/a>? Learn more about acoustic testing<\/a>.<\/p>\n Cooling is significantly more expensive than heating. Therefore, it is worth identifying potential benefits from improving the insulation and airtightness of cold storage halls, freezers, and air-conditioned spaces.<\/p>\n We conduct blower door airtightness tests and prepare reports in accordance with current norms and certifications such as BREEAM, LEED, and EU Taxonomy. With the use of thermal imaging cameras or smoke generators, we accurately detect leaks and recommend appropriate corrections.<\/p>\n Find out why it\u2019s worth performing an airtightness test<\/a>.<\/p>\n We perform thermal imaging inspections in accordance with ISO 6781:1983 \/ PN EN 13187 standards, including heat loss assessment, joint tightness, and identification of thermal bridges.<\/p>\n Learn more about thermal imaging in construction<\/a>.<\/p>\n We measure gas retention for facilities equipped with Gas Fire Suppression Systems (GFS).<\/p>\n Using thermal imaging, we can inspect electrical installations under full load without contact. This helps prevent serious failures, excessive energy loss, and even fires. We also perform diagnostics using ultrasonic detectors.<\/p>\n See how electrical installation inspections<\/a> are done.<\/p>\n Due to their sensitivity to external conditions, we conduct thermal inspections of photovoltaic systems to detect so-called hot spots that reduce module efficiency and ultimately the entire installation\u2019s performance.<\/p>\n Want to make sure your solar installation is working properly? A photovoltaic system inspection<\/a> is the perfect solution.<\/p>\n We conduct air quality and atmospheric pollution testing for functional and utility program purposes. We assess indoor air quality in response to employee discomfort. We monitor temperature and humidity, measure concentrations of carbon dioxide, carbon monoxide, PM10 and PM2.5 particles, VOCs, and formaldehyde. We also test ventilation performance and conduct microbiological analyses.<\/p>\n
\nCold Storage and Freezer Room Testing<\/strong><\/h4>\n
\nAirtightness Testing<\/strong><\/h4>\n
\nThermal Imaging Inspections<\/strong><\/h4>\n
\nFire Suppression Gases<\/strong><\/h4>\n
\nElectrical Installations<\/strong><\/h4>\n
\nPhotovoltaic Systems<\/strong><\/h4>\n
\nAir Quality<\/strong><\/h4>\n